Press Room

Use T-Series connectors when you want to branch off of a common wire run.
Ideal for wiring several fixtures in parallel (such as lighting).
The main line will remain as one length of wire, eliminating junctions at every fixture.
The connector hinges open to allow the wire be run thru the connector, without cutting or stripping the insulation.
Quick and easy connections are made in seconds.
No tape or wire nuts required.
Conductivity is assured for the entire run, since the main line remains uncut.

Specifications:

Two Way Series connectors have a unique dual channel feature, which allows pre-assembly of the connector onto a component or fixture.
One Channel of the i-Clamp can be permanently added to the wiring of the component, so that it cannot get lost in the mounting process.
The Second Channel of the connecter is unused until the component is mounted.
Once the component is mounted, the wiring can be completed, by simply attaching the wiring to the pre-installed i-Clamp.

Specifications:

Use One Way series connectors for splicing several lines together.
Eliminates bulky twisted wire splices and the need for wire nuts and electrical tape.
Connection can be inspected because connecter is made from translucent polycarbonate.
Junction boxes have a clean appearance, not crowded with bulky twisted wire splices, which are impossible to visually inspect.

Specifications:

800.688.6937